This crank is for the C.S. Bell #62 yoke.  Please note this crank is not a substitute for the #1/#2 crank!

(3)

This crank is for the C.S. Bell #1 and #2 Farm bell yokes that are shaped like a rhombus.....you know, like a kite!
If your yoke end is a roundish taper with a "shelf" on the bell side and a small toe/bump on the outside you may need a number 3 crank.

(13)

This is the crank for the #1 or the #2 USA/BNC Bell yoke
It will work on other non-USA and non-C.S. Bell yokes that have a flat face on the yoke for the crank handle to be attached to using a bolt.

(5)

This crank is for the C.S. Bell #3 Farm bell.

It also fits the larger #4 C.S. Bell yoke with a little bit of filing to enlarge the opening of the crank.
It also fits the smaller #2 C.S. Bell yoke with the addition of a small shim - please let us know in the order comments that you have a #2 C.S. Bell yoke so we can include the shim.

NOTE: this is for a tapered round end of the yoke, with a slight 'toe' on the end.

(37)